To make the correct decision on the type from wood is a key factor for the success of the project. Generally, the noble wood is sold in tables that are moderate in feet. This is equivalent to a table of 144 pulgadas3 of volume (1 inch of thickness x 12 inches in width x 12 inches in length). In order to be able to consider how much wood to buy, is important to calculate how many feet contain the wood. In order to calculate the feet of a wood, it computes the volume of the wood in inches (multiplying the thickness by the width by the length), and soon divides the result obtained by 144 pulgadas3. It must realise the necessary conversions when the unit of measurement is not the inches.
After to consider how much wood will need for its project, it buys 10 to 25% more of the considered thing in case the material had some defect. The majority of wood available in the market, except the pine, must be had. The rough or had wood usually are not sold in basic sizes of 4/4, 5/4, 6/4, etc. A piece had with wood of 4/4 usually has a thickness of 7/8, 1/8 finer than the original piece. If the wished thickness is of 1 inch, must buy 5/4 wood of or W4. To select the best wood of the market requires of a detailed observation. No wood is 100% efficient one, therefore, it is important to select that one that has the smaller amount of defects to maximize its use.
He is recommendable to look for and to select personally tables, those that own pleasant color and veins. Squaring its pieces of work Once bought the wood, the following step is to square it. To square the wood means to give form him to obtain that the faces of the wood are perpendicular to each other, that is to say, must be in the correct angle among them.